Short answer

The product name, where its data sheet and code report are, the ratio and the pressure and temperature window they will run, the shelf life and the storage range of the drums, how thick each pass may be, what thermal barrier the code needs over it, and what the written warranties say. An installer who sprays every week answers these from memory because they are the settings on the machine that morning. If the installer can't name the product, nothing downstream can be checked: not the settings, not the shelf life, and not whether a product warranty applies.

FoamGuard

How FoamGuard handles it

  • Named on page 1. The product, the places and the thickness are the Scope & Specifications of your Agreement (Section 2), and FoamGuard installs to that product's published specifications and application guidelines (Section 9).
  • Settings and records. The crew runs the ratio, pressures and A, B and hose temperatures from the product's data sheet, sprays test patterns first, verifies thickness with depth gauges and photographs the work; the photos, the thermal scan, every set's lot number and the foam type go into your project file at completion.
  • Paper you can read. The manufacturer's warranty terms are enclosed with the Quote, and the Safety Data Sheets are available on request (Sections 11 and 14).

From the Project Agreement, Sections 2, 9, 11 and 14.

Industry

What's typical elsewhere

The answers are all public, which is the point. Huntsman's HEATLOK HFO High Lift data sheet gives a 1:1 ratio by volume, an initial pressure of 1,200 to 1,400 psi, A-side 92 to 106°F, B-side 98 to 115°F and hose 102 to 115°F, with the A-side good for 12 months and the resin 6, stored at 50 to 100°F and 50 to 70°F. BASF's WALLTITE HFO guidelines give 900 to 1,200 psi dynamic, heaters at 120 to 130°F in cold climates and 110 to 125°F in warm, and a resin shelf life of about three months for one grade and six for the others. Huntsman's application guide holds the ratio to a 5 percent variance and says "Any deviance from that should be addressed immediately before continuing the installation."

The EPA's contractor checklist expects the installer to "Verify and record: material temperatures, pressures, and ratios; ambient and substrate temperatures" and to "Retain records of equipment maintenance, settings used, material names, system numbers, seasonal formulations" and more. In Canada, where installer certification is required, CUFCA requires "detailed daily work sheets providing a paper trail of testing results, site conditions, installers etc."

Ten things a trained installer can tell you on the spot

  1. The exact product name and its maker.
  2. The evaluation report number (ESR or CCRR).
  3. The mix ratio and the ratio tolerance.
  4. The pressure window and the A, B and hose temperatures for that product.
  5. The shelf life of each drum and the date of manufacture on the labels in the trailer.
  6. The maximum pass thickness and the wait between passes.
  7. The R-value per inch and the thickness that makes the foam a Class II vapor retarder.
  8. Whether the space needs a thermal barrier or an ignition barrier over the foam.
  9. The re-occupancy time and the ventilation plan.
  10. What the product warranty and the workmanship warranty each cover.

Want a number for your own project? Price My Project, book a free visit or call (814) 208-3478.

More on this

What if the installer says the foam is "basically all the same"?

It isn't. Products differ in blowing agent, density, R-value per inch, permeance, pass thickness and shelf life, and each has its own report and data sheet. That answer is a reason to ask for the product name.

Can I see the settings on the machine?

Ask. The proportioner displays its pressures and temperatures, and the EPA checklist expects them to be recorded. A test spray on cardboard before the first pass is the practical proof that the settings are right for the product.

Where do the lot numbers go?

On the drum labels, and from there into the job record. FoamGuard records every set's lot number and sends it in your project file, so the foam on your wall can be traced to the plant that made it.

Sources

  1. Huntsman Building Solutions: HEATLOK HFO High Lift Technical Data Sheet (rev. 11.25.24)
  2. Huntsman Building Solutions: HEATLOK HFO High Lift Product Application Guide (rev. 11.25.24)
  3. BASF: WALLTITE Series HFO Spray Foam Insulation Application Guidelines (Feb. 9, 2023)
  4. US EPA: Contractor Checklist, Guide to Safer Workplace Practices for Installing High-Pressure, Two-Component SPF (working draft, Jan. 22, 2015)
  5. CUFCA: Quality Assurance Program Overview (Canada)