Short answer
The report behind the product matters more than the logo. A top-tier closed-cell foam comes with a third-party code evaluation report that fixes its thickness limits, fire performance, thermal barrier rule and the requirement that it be installed by contractors the manufacturer has authorized; a published data sheet with a processing window; a technical service line; and a written warranty that can be registered in your name. A product with none of those can't be checked, and foam that is out of date, stored hot or made to no published specification is one place odor, adhesion and cracking problems start.
How FoamGuard handles it
- We name the product on the quote. FoamGuard sprays closed-cell foams from Huntsman and BASF, is a certified installer for both, and the product name goes on page 1 of the Agreement with the places and thickness (Section 2).
- Every set is traceable. The drum lot numbers of every set are recorded and go into your project file with the foam type, so the product on your wall can be matched to its data sheet and its plant.
- Two warranties, both in writing. The manufacturer's product warranty, registered in your name (Section 14), and A Craftsman's Promise, FoamGuard's five-year craftsmanship warranty.
From the Project Agreement, Sections 2 and 14.
What's typical elsewhere
The code reports write the installer requirement into the product. ICC-ES ESR-4073 (Huntsman HEATLOK HFO High Lift): the insulation "must be applied by contractors authorized by Huntsman Building Solutions, LLC." Intertek CCRR-0374 (BASF WALLTITE Max and One): "professional spray polyurethane foam installers approved by BASF Corporation" or approved by the SPFA. Both reports require installation "in accordance with the manufacturer's published installation instructions," and both say the report governs on any conflict.
The reports also fix what the drum label must show: the maker's name, the product, the density, the flame-spread and smoke-developed indices and the date of manufacture, with the report number or the evaluation mark. Huntsman's closed-cell warranty applies to foam "installed by authorized contractors using trained applicators" and excludes "improper installation of Product (not in strict adherence with HBS's written instructions)," so the warranty and the authorization travel together.
The five-minute check
- Get the exact product name from the quote.
- Search it with "technical data sheet": ratio, pressures, temperatures, shelf life.
- Search it with "ESR" or "CCRR": who may install it, pass thickness, thermal barrier.
- Ask whether the installer is authorized by that maker and whether the warranty will be registered to you.
- On install day, read the drum: product, date of manufacture, lot number, report number.
More in not all spray foam is the same.
Want a number for your own project? Price My Project, book a free visit or call (814) 208-3478.
Which spray foam brand is best?
There is no single best. Among products with a current evaluation report and a published data sheet, the differences are in R-value per inch, permeance, blowing agent and pass thickness, and a good installer picks for the building. The report is what separates a checkable product from an unknown one.
Is closed-cell foam from a smaller maker bad?
Not necessarily. Ask the same question of any maker: is there a current ICC-ES or Intertek report, a data sheet, a warranty, and an authorized installer. If yes, it can be checked; if no, it can't.
Why does FoamGuard spray two brands?
Both are top-tier HFO closed-cell products with current code reports, and being certified for both means the right product for the job and the substrate rather than the one that happens to be on the shelf.
Sources
- ICC-ES ESR-4073: Heatlok HFO High Lift Spray Foam Insulation (reissued August 2026)
- Intertek CCRR-0374: BASF WALLTITE Max and One Spray-Applied Polyurethane Foam Insulations (rev. Feb. 19, 2025)
- Huntsman Building Solutions: Closed-Cell Spray Foam Limited Lifetime Warranty (rev. 04.08.21)
- Huntsman Building Solutions: HEATLOK HFO High Lift Technical Data Sheet (rev. 11.25.24)
- BASF: WALLTITE Series HFO Spray Foam Insulation Application Guidelines (Feb. 9, 2023)
