Short answer
Two documents, both in writing, both with conditions you can check. The manufacturer's product warranty covers the material and is tied to an authorized installer and installation to the maker's instructions; it has to be registered (Huntsman's, for example, within 90 days). The installer's workmanship warranty should cover what the manufacturer's excludes: adhesion, voids, thickness, off-ratio foam, shrinkage and cracking from application. It should name those defects, a term, response times and who inspects a claim. A verbal promise that is good until the truck leaves the driveway covers none of that.
How FoamGuard handles it
- A Craftsman's Promise. FoamGuard's five-year limited craftsmanship warranty covers "loss of adhesion or delamination, voids or missed areas within the agreed coverage, installed thickness below specification, off-ratio or improperly cured foam, or shrinkage or cracking caused by application," repaired, re-sprayed or replaced "at no charge for labor, material, equipment or travel," with a response within five business days and an inspection within fifteen (Section 14).
- The manufacturer's warranty, registered. FoamGuard registers the product warranty in your name within 7 days of the job, inside the 90-day window Huntsman's warranty sets, for example, and the terms are enclosed with the Quote.
- Transferable and verifiable. The warranty follows the building to a new owner for the rest of its term when FoamGuard gets written notice within 60 days of the sale, and anyone can check a certificate by its ID at foam-guard.com/warranty. The certificate is issued once every payment on the project is recorded.
From the Project Agreement, Section 14.
What's typical elsewhere
Manufacturer warranties are conditional by design. Huntsman's closed-cell limited lifetime warranty applies to foam "installed by authorized contractors using trained applicators" and "applied in accordance to the product specification," must be registered "within 90 days from product application," excludes "defects or failure caused by improper installation of Product (not in strict adherence with HBS's written instructions)," and its remedy is to "repair or replace any defective Product at the cost of the material only," with no labor. The code reports tie the authorization to the product: ESR-4073 requires contractors authorized by Huntsman, CCRR-0374 installers approved by BASF or the SPFA.
That leaves the workmanship warranty to carry the risks that actually show up on a wall. Federal consumer guidance from CPSC staff is to "Ensure your contractor has received appropriate training" and to "Check the contractor's references"; Pennsylvania's Home Improvement Consumer Protection Act requires the contract to carry the performing contractor's registration number and the names of known subcontractors, so the warranty and the person who owes it can be matched.
Read a workmanship warranty for these six things
- The defects it names. Adhesion, voids, thickness, off-ratio foam, shrinkage, cracking.
- The term, counted from a date on a certificate.
- The remedy: repair, re-spray or replace, and who pays for labor and material.
- Response and inspection times in days.
- Whether it transfers to a new owner.
- Who you call, and how the ID is verified.
Want a number for your own project? Price My Project, book a free visit or call (814) 208-3478.
Does the manufacturer's warranty cover bad installation?
No. It covers the material and excludes improper installation. Adhesion, thickness, off-ratio and application cracking are the installer's to warrant.
What is a "taillight warranty"?
Trade slang for a promise that lasts until the installer's taillights leave the driveway: nothing in writing, no term, no claims process. Ask for the document.
When is the FoamGuard warranty issued?
The certificate is issued as soon as every payment on the project is recorded as received, with its ID, and the manufacturer's warranty is registered in your name within 7 days of the job.
Sources
- Huntsman Building Solutions: Closed-Cell Spray Foam Limited Lifetime Warranty (rev. 04.08.21)
- ICC-ES ESR-4073: Heatlok HFO High Lift Spray Foam Insulation (reissued August 2026)
- Intertek CCRR-0374: BASF WALLTITE Max and One Spray-Applied Polyurethane Foam Insulations (rev. Feb. 19, 2025)
- US CPSC staff: Spray Polyurethane Foam Insulation Health and Safety Recommendations for Consumers
- 73 P.S. § 517.7, Home Improvement Consumer Protection Act: home improvement contracts (FindLaw)
