Short answer

Owners who had spray foam installed well praise five things, in this order: the building feels different (no drafts, even temperatures), the heating and cooling bills drop, metal buildings stop sweating, the foam keeps working for years, and the inside gets quieter. Each has independent data behind it. Air leakage drives 25 to 40% of heating and cooling energy in a typical home, and EPA estimates sealing and insulating saves 16% on heating and cooling in climate zone 5, which covers Western Pennsylvania.

Key points

  • Comfort comes first in owner reviews. Air leakage accounts for 25 to 40% of the energy used to heat and cool a typical home, and sealing it removes drafts and cold spots.
  • Bills: ENERGY STAR's model puts sealing and insulating at 16% of heating and cooling costs (12% of the total bill) in climate zone 5, above the 15% national average.
  • Metal buildings: closed-cell foam bonded to the steel keeps moist air off it. BASF WALLTITE is a Class II vapor retarder at 1.5 inches, Huntsman HEATLOK HFO High Lift from 1.875 inches.
  • Long life: University of Florida tests found 3 inches of closed-cell foam between roof framing tripled the uplift resistance of the sheathing.
  • Quiet: sealing gaps is what cuts outside noise. In lab wall tests every cavity insulation scored within 3 STC points; open-cell foam is the one that absorbs sound.

Where the praise comes from

The same homeowner forums and review sites that carry the complaints about bad spray foam jobs are full of owners who would do it again: Garage Journal, GreenBuildingAdvisor, TractorByNet, contractor reviews on HomeAdvisor. Their praise falls into five themes. Below, each one is set against the numbers that explain it, from the U.S. Department of Energy, the EPA's ENERGY STAR program, code evaluation reports and university test labs.

1. The building feels different

What owners say. Drafts gone, rooms the same temperature end to end, a shop that finally feels like part of the house. One pole barn owner on the Garage Journal forum said closed-cell foam makes the building "feel as dry as a house inside, comfy cool in the summer too." Another, who foamed his house walls and his metal shop, said everyone who comes into the shop comments on how nice it feels; his only regret was not foaming the ceiling of his house too.

What the data shows. Air leakage accounts for 25 to 40% of the energy used for heating and cooling in a typical residence, according to ENERGY STAR's air sealing guidance. The Department of Energy says sealing cracks and openings reduces drafts and cold spots. Spray foam seals and insulates in the same pass: in blower-door results from 906 ENERGY STAR homes in Massachusetts and Rhode Island, homes with spray-foamed walls tested significantly tighter than cellulose homes, which tested tighter than fiberglass homes. In a DOE Building America project, homes with open-cell foam at the roof deck reached 1.1 air changes per hour at 50 pascals, against 2.6 for homes insulated with cellulose; both groups also got an aerosol sealing step.

EPA estimate of heating and cooling savings from sealing and insulating, by climate zoneHorizontal bars of ENERGY STAR's estimated heating and cooling savings from air sealing and insulating, by IECC climate zone: zone 1, 7 percent; zone 2, 9; zone 3, 14; zone 4, 17; zone 4C, 20; zone 5, which includes Western Pennsylvania, 16; zone 6, 18; zone 7, 19; zone 8, 18. A dashed line marks the national average of 15 percent. Heating and cooling savings from sealing and insulating (EPA estimate) Zone 1Zone 2Zone 3Zone 4Zone 4CZone 7Zone 8Zone 6 Zone 5 (Western PA) 7%9%14%17%20%16%18%19%18% National average 15% Modeled on typical 1970s–80s homes: 25% less air leakage, insulation to the 2012 IECC. Source: ENERGY STAR.
EPA's estimate of what air sealing and insulating save on heating and cooling, by climate zone. Western Pennsylvania sits in zone 5: 16%, against a 15% national average.

2. Lower heating and cooling bills

What owners say. Lower gas bills even in a colder month. Owners who moved from a leaky building see the biggest change.

What the data shows. EPA's ENERGY STAR program estimates that sealing air leaks and adding insulation saves an average of 15% on heating and cooling costs nationally, or 11% of the total energy bill. In climate zone 5, which takes in Western Pennsylvania, the estimate is 16% of heating and cooling and 12% of the total. The model assumes a typical home built in the 1970s or 1980s, a 25% cut in air leakage and insulation brought to the 2012 energy code. A leakier starting point saves more; a newer house saves less. Spray foam energy savings: what to really expect works through a payback example.

Savings vary. Find out why in the seller's fact sheet on R-values. Higher R-values mean greater insulating power.

3. Metal buildings stop sweating

What owners say. The roof no longer drips on the truck, tools stop rusting, the shop smells dry. On TractorByNet and the Garage Journal forum, closed-cell foam applied directly to the steel is the answer pole barn owners keep giving each other for a dripping roof.

What the data shows. Condensation forms when warm, moist air touches steel colder than its dew point. Closed-cell foam bonded to the steel keeps that air off the metal and puts the cold face behind the foam. BASF WALLTITE is air-impermeable from 1 inch and a Class II vapor retarder at 1.5 inches, per its ICC-ES evaluation report; Huntsman's HEATLOK HFO High Lift data sheet gives Class II from 1.875 inches. Hansen Pole Buildings reports that Johns Manville sets 1.5 inches of closed-cell as the minimum for an adequate air and vapor barrier, and recommends 2. Why your pole barn roof drips shows the temperatures on a 20°F night.

4. It keeps working, and holds on

What owners say. "Almost 10 years since my building was sprayed. Zero issues and love it," wrote one Garage Journal member. Another, after spraying half his basement, said he would "100%" do it again and booked the same installer for the other half.

What the data shows. Cured closed-cell foam is bonded to whatever it was sprayed on, so it does not settle or sag the way loose insulation can. That bond is measurable. In University of Florida tests led by David Prevatt, 3 inches of closed-cell foam sprayed between roof framing gave a threefold increase in the sheathing's uplift resistance compared with nails alone, and wetting the wood did not measurably weaken the bond over a 150-day test. Codes still classify the foam as nonstructural insulation, so the strength is reserve, not a substitute for nailing. How long does spray foam last? covers the lifespan question.

A technician in a safety vest crouches beside test gauges and cables inside a framed house bathed in red light
A blower door test at NIST's Net-Zero Energy Residential Test Facility in 2011. The fan holds the house at a 50-pascal pressure difference and measures how much air leaks through the envelope, the ACH50 number behind the airtightness figures above.Photo: NIST, public domain

5. A quieter building

What owners say. Less wind, traffic and neighborhood noise. One Garage Journal member found foam "great for wind, cars, kids"; another described rain on a foamed metal roof as reasonably quiet.

What the data shows. Sealing does the work. Sound travels through the same cracks and gaps as air, and ENERGY STAR notes that sealing a home tightly typically results in fewer drafts and less noise. Inside a sealed lab wall the cavity insulation matters less: in Intertek tests of seven 2×4 walls, every cavity insulation scored within 3 STC points of the others. Open-cell foam is the one that absorbs sound. Does spray foam reduce noise? has the full test numbers, and where foam is not the right sound product.

The five at a glance

What owners praiseThe number behind itWhat it takes
Comfort, no draftsAir leakage = 25 to 40% of heating and cooling energyEvery leak site at the boundary sealed, checked with a blower door
Lower bills16% of heating and cooling in climate zone 5 (EPA estimate)Sealing plus insulation; savings vary with the starting point
Dry metal buildingsClass II vapor retarder at 1.5 inches of closed-cellClosed-cell bonded to the steel at the right thickness
Long life, strength3× sheathing uplift resistance with 3 inches of closed-cellFoam sprayed within specification so it stays bonded
QuietSealed gaps; open-cell absorbs soundGaps sealed; open-cell where sound matters most

What the best reviews have in common

Every one of these results depends on foam made within its specification: the right ratio, thickness, temperature and surface. That is the line between the reviews above and the five complaints on the other side of the ledger. The contractor guide lists what to check before you hire, and the free insulation cost calculator shows what a building like yours costs, with FoamGuard's own price of $1.50 to $2.25 per board foot for closed-cell beside the market range. Ready for a number? Price My Project or call (814) 208-3478.

FAQ

Is spray foam insulation worth it?

Yes, for any building that leaks air. Owners report better comfort first and lower bills second. EPA estimates sealing and insulating saves 16% on heating and cooling in climate zone 5; a leakier building saves more, a newer one less.

What do people like most about spray foam?

Comfort: no drafts and even temperatures. After that come lower heating and cooling bills, metal buildings that stop dripping, foam that keeps working for years, and a quieter building.

Does spray foam really lower energy bills?

Yes, by stopping air leakage, which accounts for 25 to 40% of the energy used to heat and cool a typical home. The size of the drop depends on how leaky the building was and how it is heated.

Does spray foam stop condensation on a metal roof?

Closed-cell foam bonded to the steel does, at the right thickness. It keeps moist air off the cold metal; BASF WALLTITE is a Class II vapor retarder at 1.5 inches and Huntsman HEATLOK HFO High Lift from 1.875 inches. Open-cell foam does not do this job on bare steel.

How long does spray foam insulation last?

Correctly installed closed-cell foam stays bonded to the framing and sheathing and does not settle or sag. Owners on forums report buildings with no issues after ten years.

Sources

  1. ENERGY STAR: Air Sealing, Building Envelope Improvements (via the Federal Depository Library Program)
  2. ENERGY STAR: Methodology for Estimated Energy Savings from Cost-Effective Air Sealing and Insulating
  3. U.S. Department of Energy: Sealing Your Home
  4. GreenBuildingAdvisor: Can you quantify the air leakage savings of spray-foamed walls? (Harley data, Energy Design Update, April 2005)
  5. U.S. DOE Building America: Aerosol Envelope Sealing of New Residences
  6. ICC-ES ESR-2642: BASF WALLTITE spray-applied polyurethane foam insulation
  7. Huntsman Building Solutions: HEATLOK HFO High Lift Technical Data Sheet (rev. 11.25.24)
  8. Hansen Pole Buildings: closed-cell spray foam and condensation (Pole Barn Guru)
  9. JLC: The Structural Properties of Foam (University of Florida uplift tests)
  10. JLC: Florida Researchers Take a Closer Look at Spray-Foam Roof Retrofits
  11. Huntsman Building Solutions: Heatlok Soya HFO Technical Data Sheet (ASTM C1338)
  12. NAIMA / Intertek: Acoustical Performance of Wall Cavity Insulation (2019 tests)
  13. ENERGY STAR: Air Sealing (2006 fact sheet, archived)
  14. Garage Journal forum: Spray foam regrets? (thread)
  15. Garage Journal forum: Pole barn is up, insulation and moisture questions
  16. NIST via Wikimedia Commons: blower door test, Net-Zero Energy Residential Test Facility (public domain)