Short answer
You get a text with our arrival time when the crew heads out, then updates as we get close. On site we walk the areas with you, mask and set up ventilation, check the surfaces for moisture, and spray in passes with depth checks as we go. Then we trim, clean up, keep the ventilation running, and walk the finished work with you. The area stays closed for the re-occupancy time, typically 24 hours.
How FoamGuard handles it
- Before the day: reminders 7, 3 and 1 day out.
- On the way: a text with our estimated arrival time when the crew heads out, then at about 1 hour (with a reminder to clear the spray area), 45, 30, 15 and 5 minutes. If you haven't agreed to texts, the same updates come by email.
- Walk-through and photos of every area before work starts.
- Masking and protection, heating and cooling shut off in the work area, and exhaust ventilation set up to the outside.
- Moisture check: a thermal camera scan of the surfaces to find cold or damp spots. Any wet area is marked and left unsprayed, and we come back to it once the cause is fixed.
- Spraying in passes, with a depth gauge checking thickness as we go. The lot number of every drum used is recorded.
- Trimming and cleanup: masking and debris removed, the work area left broom-clean.
- Ventilation keeps running through the re-occupancy time, typically 24 hours after spraying ends.
- The walkthrough: we go over the finished work and the depth readings with you and sign the Completion & Walkthrough Record. If you can't be there, you get photos and depth readings that day and a walkthrough within two business days.
- Your project file is emailed: photos, the data on the job, the foam used and its lot numbers. The warranty certificate and Warranty ID follow as soon as every payment is recorded, and we register the manufacturer's warranty in your name.
From the Project Agreement, Sections 6, 9, 11 and 12.
What's typical elsewhere
The safety steps are common to every professional installation: isolate the work area, ventilate it to the outside, keep occupants and pets out during spraying and for the re-occupancy time (commonly 24 hours for two-component foam), then clean up before anyone returns (EPA, CPSC staff, CPI). The paperwork afterward is not standardized. Ask any installer whether you'll get photos, depth readings and the product and lot numbers in writing.
What's different here: the arrival-time texts, the photo record of every area, the depth readings on a signed record and the drum lot numbers in your file come from FoamGuard's own scheduling and record-keeping system, so every job gets them the same way.
Want a number for your own project? Price My Project, book a free visit or call (814) 208-3478.
What time does the crew arrive?
You get the estimated arrival time by text when the crew heads out, and updates as it gets close.
When is the final payment due?
On Completion Day, at the walkthrough. If you can't attend, by the end of the second business day after spraying ends.
How long until I can use the space?
After the re-occupancy time we give you in writing, typically 24 hours after spraying ends, with ventilation running.
